How to configure TATA PJSIP trunk in asterisk Vicidial Freepbx. If you are an Asterisk Vicidial or FreePBX user and need to configure a trunk with Tata Communications, you have come to the right place. Tata Communications provides a fully-managed Voice over IP (VoIP) services, a secure and robust platform for carrying your voice traffic.
With Tata’s VoIP services, service providers and customers can easily connect their IP-enabled devices, such as their existing PBX, to transform their communication and collaboration capabilities. In this article, we will show you how to connect your existing Tata Communications VoIP trunk to Asterisk Vicidial or FreePBX.
Before getting started, it is important to make sure that you have an existing VoIP trunk established with Tata Communications. To do this, you will need your Tata trunk username and password. Once you have obtained these credentials, you are ready to get started.
The first step is to configure Tata Communications’ PJSIP trunk in asterisk Vicidial or FreePBX. To do this, navigate to Settings > Trunks in Asterisk Vicidial or FreePBX, and select Add Trunk. Then select PJSIP and enter the Tata Communications’ trunk details as shown below:
Make sure to save all the settings, and your Tata Communications PJSIP trunk should now be configured in your Asterisk Vicidial or FreePBX system.
Using Tata Communications’ VoIP services, you can now make and receive voice calls, send and receive text messages, and access voice mail services. With the custom-made PJSIP trunk in asterisk Vicidial or FreePBX, you can stay connected with your customers, wherever they may be.
How to configure TATA PJSIP trunk in asterisk vicidial freepbx. In this article I will explain step by step guide to configure the TATA PJSIP trunk in asterisk based dialers like vicidial, goautodial, Freepbx, elastix, issabel.
If you have purchased the TATA VOIP trunk which supports PJSIP protocol and want to configure the same in your asterisk PBX then this Tutorial is for you. In the article I have provide PJSIP settings required to configure the TATA VOIP in asterisk and vicidial.
Who is TATA?
Tata Tele Business Services, belonging to the prestigious Tata Group of Companies, is the country’s leading enabler of connectivity and communication solutions for businesses. Tata Providing PRI trunks over VOIP as SIP or PJSIP to Indian customers.
Time needed: 4 minutes
- Tata PJSIP Network Settings:
Tata PJSIP trunk is provided with a dedicated network from TATA tele service, that is you will be provided with a router with dedicated subnet, either you need to have two ethernet interface in your dialer to connect to TATA network and also connect to your existing network, or you need to have a router which can support two networks with proper routing.
Check the Article for the Network connectivity required for the TATA network and Asterisk server. - Enable PJSIP
PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE.PJSIP is both compact and feature rich. It supports audio, video, presence, and instant messaging
- Configure Tata PJSIP Carrier Details
Once you have purchased the TATA PJSIP trunk, you will be provided with the below details.
DID Range and Pilot Number
Username and password
TATA network subnet range
SIP gateway and Media IP - Asterisk – Vicidial PJSIP Settings for TATA
If you are using Plain asterisk or configuring the trunks in command line, then add the below PJSIP settings in pjsip.conf which is located in the /etc/asterisk/ folder.
If you are using vicidial then add all the pjsip settings mentioned here under the same carrier Account settings.
Note: you no need to add any registration string for the pjsip trunks.
Replace the username ,password, IP address
my username:0091805478596456, pass=1234, IP=10.60.41.32
[tatasiptrunk]
type=registration
retry_interval=20
max_retries=10
contact_user=00918069123456
expiration=600
transport=0.0.0.0-udp
outbound_auth=tatasiptrunk
client_uri=sip:[email protected]:5060
server_uri=sip:10.60.41.32:5060
[tatasiptrunk]
type=auth
auth_type=userpass
password=1234
username=00918069123456
[tatasiptrunk]
type=aor
qualify_frequency=60
contact=sip:[email protected]:5060
default_expiration=600
[tatasiptrunk]
type=identify
endpoint=tatasiptrunk
match=10.60.41.32
[tatasiptrunk]
type=endpoint
transport=0.0.0.0-udp
context=from-trunk
dtmf_mode=rfc4733
disallow=all
allow=alaw
allow=ulaw
allow=g729
direct_media=no
rtp_symmetric=yes
trust_id_inbound=yes
send_rpid=yes
;from_domain=10.60.41.32
inband_progress=yes
rewrite_contact=yes
;force_rport=yes
aors=tatasiptrunk - Asterisk PJSIP Dialplan
Use the below dialplan to dial over the tata trunk with PJSIP dialplan application. If you are using the Asterisk and manging over command line, then add this dialplan in extensions.conf under your preferred outbound context.
For vicidial users add this dialplan in same carriers settings under Dialplan Entry
dial plan for Vicidial Users
exten =u003e _9X.,1,AGI(agi://127.0.0.1:4577/call_log)
exten =u003e _9X.,n,Dial(PJSIP/${EXTEN:1}@tatasiptrunk,30,Tto)
exten =u003e _9X.,n,Hangup()dialpal for plain asterisk users
exten =u003e _9X.,1,Dial(PJSIP/${EXTEN:1}@tatasiptrunk,30,Tto)
exten =u003e _9X.,n,Hangup()
Conclusion:
Hope this article is helpful for you, if you like this post kindly share and follow. Still you are facing issue or need a professional support reach out to out support at [email protected]
